Our 20 yard drawstring dumpster liner is a woven polyethylene liner for 20-yard roll-off bins, available with sewn or extruded seams.
It lines a standard roll-off bin so waste goes into the liner, not onto the container walls. A drawstring runs through a sewn pocket along the full top edge. Cinch it to hold the liner in place while loading, then pull it closed to wrap the load before pickup.
Where It’s Used
- Roll-off bins and dumpsters
- Demolition and renovation debris
- Contaminated soil and site cleanup
- Industrial and manufacturing waste
- Any job where you want to keep the bin clean and the load contained
Why Use a Liner
- Keeps waste off the bin walls and floor, which cuts cleaning and washout costs.
- Contains dust and loose material in transit.
- Drawstring closure wraps the load before it leaves site.
- Holds in place during loading, including in wind.
- Helps extend the life of your containers.
Specifications
| Spec | Detail |
|---|---|
| Finished size | 23 ft (L) × 8 ft (W) × 8 ft (H) |
| Fits | 20-yard roll-off containers |
| Material | Woven polyethylene (PE), white |
| Fabric | 8 × 8 weave, 80 gsm minimum |
| Top closure | 5 mm nylon drawstring in a 2″ sewn pocket, full perimeter |
| Seam options | Sewn joints or extruded (heat-welded) joints |
| Packing | Flat baled on a pallet |
Choosing a Seam Type
Sewn seams are standard for general debris and dry, bulky waste. Extruded seams are heat-welded with no needle holes along the joints. Choose them for finer material or better containment at the seams.
Need a different size? Ask us about other bin sizes and custom liners.
